Morgan Powerflex Ceramic Tile Adhesive
Poweflex is a cementitious one pack, flexible, fast setting, rubber based tile adhesive. Power flex, when cured, exhibits water resistance, high bond strength and superior flexibility.
Powerflex installations can usually be grouted after only 3 hours.
Technical Details
Complies with AS 2358-1990
Colour and Type
Grey/White powder
Specific Gravity
0.82 kg/ltr
Toxic Hazard
No
Inflammable
No
Mixing ratio
10.3
Coverage
12m² / 20kgs using a 10mm notched trowel
Pot life
Once mixed approx 1 hour at 20°c and 50% relative humidity
Consistency of mix
Very viscous
Open time
Approx 10 mins - see conditions on spec sheet
Application temperature range
From + 10°c to 40°c
Ready for traffic
After 12 hours
Cure time
Initial cure in 7 days
Full cure in 14 days
Floor grouting
After 3 hours
Damp resistance
Excellent
Ageing resistance
Excellent
Resistance to solvents and oils
Excellent
Resistance to acids and alkalis
Good
Resistance to temperature
From - 30°c to + 90°c
Flexibility
High
Application
|
Suitable Tiles |
Suitable Substrates |
Colour |
|
| Natural Stone | Over 4515 Acoustic Underlay | White / Grey | |
| Bicottura | Concrete/Cement Render | Interior | Exterior |
| Monocottura | Brickwork/Blockwork | Floors | Floors |
| Fully Vitrified | Fibre Cement Sheets (primed) | ||
| Porcelain | Plasterboard (primed) | ||
| Over Morgan's Waterproof Membrane | |||
| Painted Surfaces | |||
| Tilt Up Slabs |
