RegupolŪ E48
Product Details / Technical Details
Product Information
| Material | RegupolŪ E48 8/4mm |
| Delivery Form | In rolls |
| Size | 25mē 20Lm x 1.25m wide Weight: 82.5kg/roll |
| Colour | Black |
Physical Data
| Temperature resistance | From -20°c up to 80°c |
| Weighted reduction in impact sound according to ISO 140-8 / ISO 717-2 |
DLw = 20dB |
| Calculation value for DIN 4109/89 | DLwr = 18dB |
| Meet value of dynamic stiffness according to DIN EN 29052-1 |
s' = 47 MN/mģ |
| Thermal conductivity | 0.14 W/mk |
| Maximum load | up to 3,000 kg/mē |
Installation
Advantages
- Excellent insulating properties
- No loss of thickness even under extreme static or dynamic loads
- Maximum operation load up to 30 KN/mē
- Reduces construction height
- Resistant to ageing and deformation
- Permanently resilient and resistant to perishing
- High propensity for recovery
- Protects expansion joints
- Quick installation
- Continuous quality controls during production
The Installation
It is necessary to have a clean cement floor. Protruding edges and stones should therefore be removed. Any minor unevenness in the surface will not cause any problem to the material and it will adapt accordingly. The first stage is to lay the edge insulation strips, which are made, for example, from light, expanded material or mineral fibres. Next the Regupol E48 is rolled out. Note: due to winding tensions it is possible that the sheet will shrink back slightly in its length. We recommend therefore, that the insulation sheeting be pulled up a few centimetres over the front of the edge insulation strips. After a few hours the sheet can then be cut to the correct length. The material should be laid flush and adhered together with an appropriate adhesive, in order to avoid noise transmission paths.
