Regupol Resilient One Part Adhesive

Description

Regupol Resilient Hitack Adhesive

The Regupol Resilient One Part Adhesive is a water based synthetic polymer, VOC compliant resilient flooring adhesive. This adhesive was specifically formulated to bond Regupol® 4515-S Acoustic Underlay to most common interior sub-floors. This adhesive was specifically designed to bond approved resilient floor coverings to the Regupol® 4515-S Acoustic Underlay. In approved applications the product could also be used to adhere Regupol® and everroll® rubber flooring products in dry areas.

Important: Prior to installation, the resilient floor covering should be checked and approved for compatibility for dual bonding to the Regupol® 4515-S Acoustic Underlay using the Regupol Resilient One Part Adhesive.

Characteristics

  • RH resistance 85% and falling (ASTM F2170)
  • Water based
  • Spreads easily
  • Aggressive grab
  • VOC Compliant
  • Available in; 10 Litre pots
  • Australian made

Application

Be sure to read the Regupol Resilient One Part Adhesive Information Sheet before installation.

Spread Rate

When bonding Regupol® 4515-S Acoustic Underlay to concrete substrate, apply Regupol Resilient One Part Adhesive with a V1 (1.6mm) trowel at a rate no greater than 4.5 - 5.0m²/L or 45m² per pot to the substrate.

When bonding approved resilient flooring products to Regupol® 4515-S Acoustic Underlay, apply Regupol Resilient One Part Adhesive with a V1 (1.6mm) trowel at a rate no greater than 4.5 - 5.0m²/L or 45m² per pot. Note: For resilient floors over 2mm thick contact Regupol Australia for appropriate trowel size.

When bonding Regupol® and everroll® flooring products to the substrate, apply Regupol Resilient One Part Adhesive with a V2 (2.4mm) trowel at a rate no greater than 3.0 - 3.5m²/L or 30m² per pot to the substrate.