Regupol Resilient Two Part Polyurethane Adhesive

Description

Regupol Resilient Two Part Polyurethane Adhesive BSW Berleburger Schaumstoffwerk GmbH

The Regupol Resilient Two Part Polyurethane Adhesive is a solvent free, non-flammable adhesive, designed to bond approved resilient floor coverings to Regupol® 4515-S Acoustic Underlay. This adhesive is also used for adhering everroll® rubber flooring to Regupol® Shockpads to create a Composite Flooring system. The product is suitable for wet areas.

Important: Prior to installation, the resilient floor covering should be checked and approved for compatibility for dual bonding to the Regupol® 4515-S Acoustic Underlay using the Regupol Resilient Two Part Polyurethane Adhesive.

Characteristics

PART A (Resin)Part B (Hardener)
ViscosityPasteLiquid
ColourLight greyDark Brown
Spec. Gravity1.45kg/Litre1.2kg/Litre
Mixing Ratio4.5 parts by weight1 part by weight
Pot life at 20°CApprox.30-45min
  • High temperatures accelerate, while low temperatures will retard curing.
  • Curing Minimum 8 hours – Dependent upon ambient temperature and application. High traffic areas 48 hours, preferable.
  • VOC Compliant
  • Australian Made
  • Available in 11kg pots

Application

Be sure to read the Regupol Resilient Two Part Polyurethane Adhesive Information Sheet before installation.

Spread Rate

When dual bonding resilient floor coverings to Regupol® 4515-S use a V1 (1.6mm) trowel for both applications –allow approx. 2.0-2.5m² per kg or 20m² per pot for both applications.

When adhering Regupol® and everroll® flooring products directly to the substrate – use a V2 (2.4mm) trowel –allow approx. 1.0-1.5m² per kg or 11m² per pot.

When adhering everroll® rubber flooring directly to Regupol® Shockpad Underlay for a Composite Flooring system – use a V2 (2.4mm) trowel – allow approx. 0.7-0.9m² per kg or 7m² per pot.