Regupol® vibration 200

Product Details

Physical Data

Continuous static load0.02 N/mm²
Peak loads (rare, short-term loads)0.05 N/mm²

The material must be carefully and permanently protected against moisture during transport, storage, processing and use. Wet material may not be used.

Static modulus of elasticityBased on
EN 826
0.02 - 0.08N/mm²Tangential modulus, see figure “Modulus of elasticity”*
Dynamic modulus of elasticityBased on
DIN 53513
0.05 - 0.38N/mm²Depending on frequency, load and thickness, see figure “dynamic stiffness“*
Mechanical loss factorDIN 535130.22[-]Load-, amplitude- and frequency-dependent
Compression setBased on
DIN EN ISO 1856
3.1%Measured 30 minutes after decompression with 50% deformation / 23 °C after 72 hrs
Tensile strengthBased on
DIN EN ISO 1798
0.12N/mm²
Elongation at breakBased on
DIN EN ISO 1798
40%
Tear resistanceBased on
DIN ISO 34-1
1.0N/mm
Fire behaviourDIN 4102
DIN EN 13501
B2
E
[-]
[-]
Normal flammability
Sliding frictionBSW-laboratory
BSW-laboratory
0.7
0.8
[-]
[-]
Steel (dry)
Concrete (dry)
Compression hardnessBased on
DIN EN ISO 3386-2
14kPaCompressive stress at 25 % deformation
test specimen h = 51 mm
Rebound elasticityBased on
DIN EN ISO 8307
14%dependent on thickness,
test specimen h = 51 mm
Force reductionDIN EN 1490473%dependent on thickness,
test specimen h = 51 mm

* The technical data sheets are available for download in the password protected area. Register here to get access.